General Tool Warehouse
On this page you can find a wide variety of special tools like
Sacnners,
Thread Repair/Spark Plug/Big-Sert Kits,
Spark Plug Tools,
Oil Filter Wrenches,
Wheel Nut Sockets,
Wheel Bearing Tools, Hex Nut Drivers,
Fuel Hose Clamps,
Socket,
Wrenches,
Screwdrivers,
Ball Joint Tools/Spring
Compressors and other
General Tools
| Tool # | Tool Name | Description |
|
Scanners / Electrical Equipments |
||
| IScanII | Autoland | "All in One" Diagnostic Scanner for European, Asian, American Cars (Passthrough is including) |
| OB91 | VeDis | Handheld Diagnostic Scanner with interchangeable cartridges for European and Asian vehicles. |
| X-431 | Launch | Handheld Diagnostic Scanner for European and Asian vehicles. |
| M0021 | Breakout Box | 126 pin breakout box. Use
it to identify a
wide variety of system failures. -Fuel Injection / ABS / ASR / Igniton / EGS / EML / DME / Climate Control / LH / HFM... |
| Time-Sert | Thread Repair Kits | Kit contents: Drill,
Counter-bore, Cutting tap, Insert driver, 5pcs steel inserts (bold RED text are insert length supplied in kits). |
| Time-Sert | Spark Plug Kits | Kit contents: Step Top,
Wrench, Seat Cutter, Insert driver. (Do not contain inserts, order separately.) |
| Time-Sert | Big-Sert Kits | Will repair oversize holes
which have previously been repaired. Gives increased load protection for
critical use. Big-Sert is a heavy wall solid bushing. Easy to install
with positive placement. Kit contents: Drill, Counter-bore, Tap, Insert driver, Five pcs steel inserts |
| K38-200 H1849 | Pliers | For R&R of spark plug connectors, anti-heat terminals in particular |
| H2169/S3045 | Oil Filter Wrench | 3/8" drive, 14 point, 74 mm with outside hexagon size 22mm and 1mm dia. bore. |
| TTS2402 | Oil Filter Wrench | 3/8" drive, 6 point, for
R&R of oil filter cartridge element. 32mm, 36mm Applicable: BMW, Mercedes-Benz, VW/Audi |
| H2169-27 | Oil Filter Wrench | 3/8" drive, 6 point, for R&R of oil filter cartridge element. Size: 27mm |
| M103-0209 | Oil Filter Wrench | Fits plastic threaded cap on oil filter housing |
| Koken972 | Socket | 1/2"drive, 19mm aluminum wheel lug nut socket (short). |
| B90A-Euro | Rear Wheel Bearing Kit | Used for R&R the wheel
bearing and hub of spindle assemblies. Applicable: BMW, Mercedes-Benz, VW-Audi, Volvo |
| M4037/S12975 | Fuel Hose Clamp | Use it to stop fuel flow
temorarily Applicable: All models |
| H426/S12506 | Hex Nut Drivers | 190mm long flexible hose clamps hex nut drivers for removing hose clamps with worm drive threads. Available: 5mm, 6mm, 7mm and 8mm and 10 mm |
| H428 | Hex Nut Drivers | Chrome-plated, short
pattern (230mm long) hex nut drivers. Available:7, 8, 9, 10, 11, 12, and 13 mm |
| H428LG | Hex Nut Drivers | Chrome-plated, long pattern
(350mm long) hex nut drivers. Available: 7, 8, 9, 10, 11, 12, 13, and 14mm |
| K2010/H8501 | Allen Sockets | 1/4" drive, 6 point short
Allen sockets. Available from 2.5mm to 8 mm sizes (Kokon or Hazet) |
| H985 | Allen Sockets | Extra short Allen sockets,
1/2" drive to access to tight locations. Available: 4, 5, 6, 8, 10, 12, 14, 17, 19mm |
| S10507 | Allen Wrench | 370mm long, 3 mm, for adjusting C.O. value (CIS fuel injection) |
| S51 | Sockets | Extra deep, 1/2" drive, 12 point socket. Available from 12mm to 32mm sizes |
| K13430 | Impact Sockets Size: 5, 6, 8, 10, 17mm |
3/8" drive impact sockets for various applications in tight locations requiring higher torque values, such as water pumps, head bolts, fan bolts. |
| S1054 | Allen Sockets | 1/2" drive, 6 point, 140mm length, 8 and 10 mm sizes, for cylinder head bolts. |
| S3054 | Allen Sockets | 1/2" drive, inhex torx, 140mm long allen sockets, available: 8mm, 10mm, 12mm |
| H992T | Torx Sockets | Inside TORX Screwdriver
Bits. Available: T20, T25, T27 |
| H8801 | Allen Sockets | 1/4" drive, 6 point, long screwdriver bits. Available: 5mm, 7mm, 8mm, 9mm, 10mm |
| Koken85 | Allen Sockets | 3/8" drive, 6 point, long screwdriver bits. Available:5mm, 10mm |
| H880G-E | Torx Sockets | Torx Socket with hinged
joint for outside TORX screws. Available: E-10 (9.42mm), E-12 (11.17mm), E-14 (12.90mm) |
| S55 | 6 Point Socket | 3/4" drive, 6 point
thin-walled socket Available: 27mm, 30mm, 32mm, 36mm, 41mm, 46mm |
| S50 | 12 Point Socket | 1/2" drive, 12 point
thin-walled socket. Available: 27mm, 30mm, 32mm, 36mm, |
| TTS1941 | Spring Compressor | Strut spring compressor for MacPherson struts (front and rear). Designed to fit securely around the spring and protect the spring from damage. |
| TTS1620 | Valve Spring Compressor Set | Complete service tool kit for OHV and OHC engines on Audi, VW, Volvo, Porsche and Japanese cars |
| US1088 | Puller | For pitman arm type tie rod ends, without tearing the ball joint boots. |
| 266H | Puller | For disassembly of pitman arm type tie rod ends w/o tearing the ball joint boots.(18mm) |
| Kukko 128-2 | Puller | For disassembly of pitman arm type tie rod ends w/o tearing the ball joint boots. (25mm) |
| TTS1808 | Universal Ball Joint Separator (24mm) | For splitting track-rod
ends, anti-roll bar mountings, ball joints, etc.., especially in small space
conditions. Applicable: VW-Audi, BMW, Mercedes, Ford, Opel, Mitsubishi,... |
| TTS1727 | Universal Ball Joint Separator | Jaw opening: 30mm and 56mm. Special design 2-stage operation suits most cars and light trucks ball joints in steering and suspensions. |
| TTS1916 | Universal Ball Joint Extractor | For splitting track-rod
ends, anti-roll bar mountings, ball joints, etc.. Jaw opening: 22mm |
| TTS1102 | Puller | Universal Ball joint separator |
| SB14 | Drill Bit | Patent drill bit from 4 mm to 14 mm hole size |
| SB22 | Drill Bit | Patent drill bit from 12mm to 22 mm hole size |
| 7709/TA18 | Adapter | For master cylinder or clutch slave cylinder reservoirs. Used in conjunction with pressure bleeder |
| US117-020 | Socket | 1/2" drive, for R&R of Oxygen sensor |
| 555-1320 | Bolt Removers | Damaged nut and bolt removers. Work with a socket or wrench. No drills, no chisels, no hacksaw, no torches, no more busted knuckles. Kit include: 6mm, 10mm, 12mm, 14mm, 15mm remover |
| ZINKO | Hydraulic Pump | 8 ton Hydraulic Pump |
| TTS1008 | Radio Removal Tool Set | For radio removal on all models with a DIN chassis radio mount. |