VW-Audi Tool Warehouse
On this page you can find a wide variety of VW-Audi Tools, like Scanners, Dashboard/Airbag  Wheel Bearing Tools, Drive-Train, Drive-Shaft, Transmission Tools, Cylinder Head, Control Arm, Ball Joint/Tie Rod End Tools, Radiator Adapters,
Oil Filter/Injection SystemsFuel Sending Tools, Crankshaft/Camshaft/Belt Tension, Spark Plug Tools, Other General Tools

Tool # Tool Name Description  

Scanners / Testers / Electrical Equipments

 
IScanIIwt Autoland Scanner "All in One" Diagnostic system for European, Asian, and American Cars  
Vedis Autoland Scanner "All in One" Diagnostic system for European, Asian and American Cars  
5800 PC-Retriever PC-Based Diagnostic system for VW-Audi, Volvo, BMW, Mercedes-Benz  

Dashboard Tools / Airbag Tools

 
3344A Radio Removal Set For Audi A4, A6, A8and VW  Beetle  
3316 Radio Removal Set For VW, new body style Passat, Jetta, Golf  
VW600 Airbag Removal / Gear selector alignment Tool Side A: Can be used to remove driver airbag from steering wheel on new body style VW Passat, Jetta, Golf and Beetle where Torx head screws are no longer used.
Side B: Can be used to align the gear selector on new body style VW Jetta, Golf and New Beetle. Side B is comparable to VW tool # T10027
 
3200X-4 4 mm, 12 point Bit 4mm, 12 point, 1/4" hex drive, for R&R of 4mm door handle screws.
Applicable: 1998 & newer VW Golf, Jetta, Passat & new Beetle.
 

Wheel Bearing Tools

 
B90-Euro Wheel Bearing Kit Use it to remove/install front or rear wheel bearings. It also removes the hub without a slide hammer.
Applicable: All front wheel drive VW (liquid-cooled) and Audi models from the early 1970's to present with S.R.W.B. and I.F.S. including A.W.D.
Also applicable for BMW, Mercedes-Benz, and Volvo
 
S55-36 Socket 36mm, 3/4" drive, 6 point for rear axle shaft nuts.
Applicable: VW Type 1, 2, 3, and 4.
 
S55-46 Socket 46mm, 3/4" drive, 6 point for rear axle shaft nuts.
Applicable: VW Type 2
 
TTS2593-1 Drive Nut For shock absorber screw connection 10.5mm
Applicable: For rear axle Golf I Cabriolet, Scirocco, Caddy
 
TTS2593-2 Drive Nut For shock absorber screw connection 12.5mm
Applicable: For front axle POLO model 82
 
TTS2593-3 Drive Nut For shock absorber screw connection 15.5mm
Applicable: For front axle Golf II, III, Jetta, Vento, Passat since 1988, Audi 80 since 1987
 

Drive-train / Drive shaft / Transmission Tools

 
H2567-16 Drain Plug Socket 1/2" drive, for tamper proof oil drain plug of transmission on Audi A4, A6, VW-Passat B5. Comparable to VW tool # 3357. (Also works on Porsche Boxter)  
S54X-M16 Socket For tamper proof oil drain plug of transmission on Audi A4, A6.  
H985-17 Socket 17mm, 1/2" drive, for transmission drain and filler plugs.  
4463 27mm male Hex Socket 3/8" drive, 27mm male hex socket, used for the removal of the timing plug (manual transmission)  
US3049 Spring Tensioner For R&R the steel clamps at the ball flange on VW exhaust systems.
Applicable: Golf 1.5 l-70 PS, Diesel 1.6 l-50 PS, 1.6 l-54 PS, Jetta 1.5 l-70 PS, Diesel 1.6 l-54 PS, Scirocco 1.5 l-70 PS
 
3299 Tensioner Release Tool For R&R of serpentine belt. Lightweight aluminum construction.
Applicable: VW Eurovan with 5 cylinder eng., Jetta & Golf with 2.0 liter 8 valve eng.
 
H8808LG-8 Socket 8mm, 12 point, 3/8" drive, 88mm long, for R&R of drive flange bolts.
Applicable: VW-Audi with 8mm drive flange bolts.
 
H8808LG-10 Socket 10mm, 12 point, 3/8" drive, 88mm long, for R&R of drive flange bolts.
Applicable: VW-Audi with 10mm drive flange bolts.
 
3104 Adjustment Gauge Used when adjusting transmission shift linkage.
Applicable: 1985 & newer Golf / Jetta equipped with 5 speed gear box.
 

Cylinder Head / Control Arm / Ball Joint/Tie Rod End Tools

 
M271 Alternator Pulley Remover 1/2" Dr, M10, 12 point, for assembling and dismantling the free wheel pulley while changing the alternator or pulley on BOSCH alternators
Applicable:
VW-Golf, -Vento, -Passat, Audi A3, VW Jetta with 1.9 liter TDI enginesMercedes-Benz M271, Volvo
 
H2579-9 Head Bolt Socket For R&R of #10 polydrive cylinder head bolt. Comparable to VW#T10070.
Applicable: VW/Audi 5 valve engines (V-6 and 4 cylinder)
 
H2581 E-14 Socket 1/2" drive Cylinder Head Torx Socket.
Appl.: Early Audi V6 cylinder head bolts with outside Torx Bolts.
 
S3054X-10 Socket 10mm, 1/2" drive, 12 point, length 140mm, for R&R of cylinder head bolts. Comparable to VW-Audi Tool # 3410.
S3054X-10 is also used in conjunction with H2592 when removing or installing the free wheel pulley of the alternator on VW Jetta TDI models
 
3400 Multi-tooth Adapter For R&R of freewheel pulley on alternator. (Hazet # 2592)
Applicable.: VW Jetta with 1.9 TDI engine
 
S3054X-12 Socket 12mm, 12 point, 1/2" drive, shaft diameter 11.47mm, length 140mm, for R&R of cylinder head bolts.
Applicable: Older VW-Audi with 12mm, 12 point head bolts.
 
S3054X-14 Socket 14mm, 12 point, 1/2" drive, for R&R of constant velocity joint bolts.
Applicable: Late model Euro Vans
 
S1054-10 Socket 10mm, 6 point, 1/2" drive, 140mm long, for R&R of cylinder head bolts.
Applicable: Older VW-Audi with 10mm allen head bolts.
 
TTS1620 Valve Spring Compressor Set Complete service tool kit for OHV and OHC engines on Audi, VW, Volvo, Porsche and Japanese cars  
VW1718 Strut Nut Socket For removing and installing the top shock retaining nut on most VW-Audi  
VW4000 Control Arm Bushing Arbor For on-the-press R&R of the control arm bushings.
Applicable: Mid 1983 and later Audi 4000; 1984 and later Audi 4000 Quattro; 1988 to mid 1990 Audi 80 and 90; all Quantums with power steering
 
VW524 Pin Wrench Socket For R&R of front shock absorber retaining nut.
Applicable: Audi 4000, Jetta, Golf & Quantum. Also used when adjusting power steering gear for Golf, Jetta & GTI.
 
TST1808 Universal Ball Joint Separator (24mm) For splitting track-rod ends, anti-roll bar mountings, ball joints, etc..
Appl.: VW-Audi, BMW, Mercedes-Benz, Ford, Opel, Mitsubishi...
 
266H Puller For removing tie rod end on VW Type 1 and 3. Height:36mm, Width:36mm, Opening:18mm.  
Kukko 128-2 Puller For removing tie rod end on VW Type 2. Height:45mm, Width:44mm, Opening:23mm.  
S54-12 Socket 12mm, 12 point 1/2" drive socket for R&R of flywheel bolts.
Appl.: VW Type 2 (early bus)
 
S54-14 Socket 14mm, 12 point 1/2" drive socket, for R&R of ball joint on Eurovan and oil pressure relief valve on VW Type2 (early bus)  

Radiator Adapters

 
W22 Radiator Tank Adapter Audi models with mail threads on filler neck of expansion tank, VW models with male threads on expansion tank (75-'93), Audi A8/S8, Porsche water cooled models with threaded neck.  
FZ23 Radiator Cap Adapter Audi models with mail threads on filler neck of expansion tank, VW models with male threads on expansion tank (75-'93), Porsche water cooled models with threaded neck.  
W30 Radiator Cap Adapter Volkswagen models with female threads on expansion tank 1990-1998, (except:'98 new Beetle and Passat models).  
W31 Radiator Tank Adapter Volkswagen models with female threads on expansion tank 1990-1998 (except 1999 Golf, Jetta; 1998-1999 New Beetle; 1998-1999 Passat;  
FZ41 Radiator Tank Adapter Applicable.: Porsche Cayenne,Audi A4 (96-'03), A6 (98-'03), Audi TT, VW Golf (99-'04), VW Jetta (99-'04), VW New Beetle (99-'04), VW Passat (99-'04), VW Touareg V6(2004)  
FZ42 Radiator Cap Adapter Applicable: Porsche Cayenne,Audi A4 (96-'03), A6 (98-'03), Audi TT, VW Golf (99-'04), VW Jetta (99-'04), VW New Beetle (99-'04), VW Passat (99-'04), VW Touareg V6(2004)  

Oil Filter Wrenches / Injection System / Fuel Sending Tools

 
TTS2402-36 Oil Filter Wrench
 
3/8" drive, 6 point, 36mm for R&R of Oil filter cartridge element. (Also available in Hazet)
Applicable: VW VR6 engines
 
TTS2402-76-14 Oil Filter Wrench 3/8" drive, R&R of new OEM oil filter with 14 flutes.
Applicable: VW, Porsche, Mercedes-Benz, BMW, Audi, with OEM oil filter 76mm 14 point.
 
TTS2402-86-18 Oil Filter Wrench 86mm, 18 point Oil filter socket for VW Golf (MKIII. Tdi, passat Tdi), Audi A6 TDi, Citroen, Peugeot, Renault,  
H2169 Oil Filter Wrench 3/8" drive, 14 point, 74mm.
Applicable: Audi, VW Golf, New Beetle & new body Jetta TDI (diesel) models and the following VW gas models: Passat, Golf & Jetta with 1.8 turbo and 2.0 liter, Rabbit, Dasher, Scirocco & New Beetle
 
TTS2402-32 Oil Filter Wrench 3/8" drive, 6 point 32 mm for R&R of Oil filter cartridge element.
Applicable: Opel Astra, Corsa, VW Passat, Audi
 
M4037/S12975 Fuel Hose Clamp Fuel Hose Clamp  
S51-27 Deep Socket 27mm, 1/2" drive, for R&R of injection nozzles with special relief-turned section to accommodate the small leakage return tubes.
Applicable: VW/Audi Diesel
 
3087 Wrench For removing and installing fuel sending unit.  
TTS1217 Fuel Sending Wrench 1/2" Drive, for R&R the fuel gauge sending unit. 139mm
Applicable: Some VW-Audi, Porsche Boxster/911
 

Crankshaft / Camshaft Tools / Belt Tension

 
TTS1212 VW Ribbed Belt Tensioning Wrench For holding V Belt tension when R&R the V-belt.
Applicable: VW-Golf, Jetta, GTI, T4 1991-1999, Audi-A6
(Engines: 1Z, AAB, AAZ, AAf, ABA, ACC, ACU, ACV, AHU, AVK
 
3243 Camshaft Alignment Tool Used to hold both camshafts at TDC position when replacing timing belt. Used in conjunction with 3242.
Applicable: Audi models with V-6 engine (2 valves per cylinder).
 
3391 Camshaft Alignment Tool Used to hold both camshafts at TDC position when replacing timing belt. Used in conjunction with 3242.
Applicable: VW/Audi models with V-6 engine (5 valves per cylinder and 2.7 bi-turbo).
 
T40005 Camshaft Alignment Tool Used to hold both camshafts at TDC position when replacing timing belt. Used in conjunction with 3242.
Applicable: VW/Audi models with 40 valve, V8 motors (5 valve per cylinder).
 
3242 Locking Pin Used to lock the crankshaft at TDC position when replacing timing belt or removing crankshaft bolt. (18x1.5)
Applicable: VW/Audi models with V-6, and V-8 engines
 
3268 Camshaft Ruler Used for alignment of camshafts.
Applicable: VW  models with VR-6
 
3359/3428 Diesel Timing Kit For locking the Camshaft without removing the valve cover.
Applicable: 1999-2003 VW TDI
 
3366 Bracket Used to retain camshaft adjuster.
Applicable: VW and Audi 4, 6(2.7L & 2.8L)and 8 cylinder engines containing 5 valves per cylinder.
 
S12717 Spanner Wrench Needed for adjusting tension of timing belt. Comparable to VW tool # V159.
Applicable: 4 cylinder Golf/Jetta through 1998, 4 cylinder Passat, Corrado, VW models with 1.9 TDI through 1997 and Audi 4 cylinder diesel models.
 
VA6031 Spanner Wrench Needed for adjusting tension of timing belt. Comparable to VW tool# T10020
Applicable: 1999 & newer Golf, Jetta, Beetle with 2.0L gas and 1.9L TDI engines.
 
H2587-32mm Idler Pulley Wrench Special steel, mat chrome-plated, plastic coated handle, for automatic toothed belt tensioning pulley.
Applicable: VW Polo Diesel, Audi 100 since 1991, Audi A6 with engine 2.5 L TDi.
 
T40030 Cam Holding / Alignment fixture Used to align and hold camshaft.
Applicable: Audi 3.0L V6 5-valve. Used in conjunction with T40011, T40026 & T40028
 
T40011 Locking Pin Used to lock the timing belt tensioner while relieving pressure from belt. (12x1.5)
Applicable: VW-Audi; 3.0L V-6 5-valve, some 1.8L 4 cyl. 5-valve turbo and 4.2L V8 5-valve with timing belt.
 
T40026 Crank Lock Pin Used to lock the crankshaft at TDC position when replacing timing belt.
Applicable: Audi 3.0L V6 5-valve. Used in conjunction with T40011, T40028, & T40030.
 
T40028 Cam. Adj. Socket Used to adjust variable valve timing on the exhaust side camshaft to basic position.
Applicable: Audi 3.0L V6 5-valve. Used in conjunction with T40011, T40026 & T40030.
 
TTS4087 Cam Timing Kit For Audi TFSI 3.0 Turbo

       

Spark Plug Tools

 
K38-200 Pliers For R&R of spark plug sockets, anti-heat terminals in particular.  
T10029 T-Handle Spark Plug Connector Remover
Applicable: VW VR6 engine
 

General Tools

 
3424 Spreader used to aid removal of the front shock absorber tube from the wheel bearing housing.
Applicable: 1999 and newer VW Golf, Jetta
 
20P CIS Injector Puller Applicable: VW Rabbit, Fox, Dasher, Scirocco, Audi 4000, 5000 with mechanical fuel injectors (CIS and CIS-E).  
TTS1941 Spring Compressor Strut spring compressor for MacPherson struts front and rear axle. Designed to fit securely around the spring and protect the spring from damage.  
H2590-1 Driving Tool For operating tensioning device when changing the V-ribbed belt.
Applicable: VW Polo, Golf and Passat, Audi since 1991
 
M271 V-Belt Pulley Remover Special design to stop the pulley and remove the center bolts.
Applicable: VW-Golf, Vento, Passat, Audi A-3,
 
H4561 Wrench For R&R of diesel injection pump screws.
Applicable: Diesel Rabbit
 
H2597G-T 45 Screwdriver Socket Torx socket 7.82mm, with hinge to operate the screws of the upper door hinge when adjusting or mounting and dismounting the driver's and co-driver's door on VW Polo Classic, Polo Variant, Caddy since 1995.